Mono roller speargun “135 cm special style”

If you are looking for a measure to use during the looking fishing, which is long, easy to load and able to offer a shooting speed outstanding, then this product may well suit your needs.

In particular, this mono roller is recommended for those who need to reload quickly and many times during the same fishing session. Thanks to its ability to undermine prey of all sizes, it mounts spears with a diameter of 8 and 8.5 mm.

Il recoil of this product results extremely low thanks to the return of the preload rubbers that pass through the upper part of the frame and to the inverter rubbers, which help to reduce the typical retraction of spearguns.

Request more information

Mono roller speargun “135 cm special style”

Produced in okoume /teak or full teak – finish with water-based impregnator.

If you are looking for a measure to use during the looking fishing, that is long, easy to load and can offer one shooting speed outstanding, then this product may well suit your needs

We recommend it if you need to recharge quickly and many times during the same session e if you want to get excited with very long shots.

We have created a thin and hydrodynamic blank to help you move it easily and the perfect balance makes it capable of undermining prey of all sizes. Mount 8 and 8.5 mm rods.

The shooting range is over 6 meters. 

The "special series” differs in the preload rubber which goes through the shaft and goes to the top of the shaft through the pulleys near the handle.

In this series all pulleys mount high performance ceramic bearings, which ensure silent and frictionless sliding, favoring the speed of the outgoing rod.

The propulsion is entrusted to inverter tires, new set up with important tires, guarantee perfect reactivity and also lengthen the life of the tires themselves which are mounted at appropriate and not extreme stretching factors.

Il recoil It's really very low, thanks to the return of the preload rubbers that pass through the upper part of the barrel and to the rubbers reverse.

Le quality are those of each our Roller:

  • very low recoil;
  • power needed to quickly push 8 mm – 8.5 mm rods;
  • absolute and constant precision;
  • easy handling;
  • swing suitable for the dimensions (always very small);
  • little maintenance;
  • obsessive attention to aesthetics;
  • careful attention to detail without exception.

We assemble single barb or double barb shafts but we will decide it independently to achieve the greatest possible precision.

Maintenance is really limited, we will show you the only thing we recommend doing at the time of purchase, with our guide and following our advice, keeping the equipment efficient will never be a problem.

Our team is always available with a excellent after-sales assistance.

It is delivered with:

  • straight grip;
  • choice auction;
  • inverter tires;
  • reel 100 with dyneema;
  • two loaders included.

On request – with supplement :

  • your name engraved on a stainless steel plate;
  • travel version with broken or whole temples.
  • big reel

It is tested in the pool before being delivered.

The materials always remain of high quality while retaining the craftsmanship in the imperfections, considered by us a value not a defect.

Don't hesitate to ask for information.

 

Specifications

MaterialFinishingHandleAuctionsReel with dyneema
TeakWater-based impregnatorStraight - universalOffset double fin -
5/16 threaded
Maxi reel-on request -

Size available

135 cm one size fits all

Recommended auctions

Recommended auctionsDiameterTypologyTypologySlip tip for threaded rod
mm 8
mm 8.5
Offset double fin5/16 threadedWith dyneema
o
stainless steel cable

Accessories available

Accessories On request when ordering
Tire replacementProtective neoprene bagStainless steel camera bracketCamera bracket TitaniumSpare rodsStainless steel plate with your name Maxi reel with dyneema

Technical notes

Each piece is tested in the pool or in the sea several times to be set correctly and to reach the optimal balance, this sometimes causes wear scratches that are removed when possible, if this is not possible, please accept it as an "added value" support of the work done with dedication and competence.

Warranty

European guarantee
Metal and polypropylene components subject to wearServiceDisassembly of components during warranty
2 years from the date of purchasepossible replacement over time.subject to wear and tear and dependent on proper use.forfeiture of the guarantee

Packaging

All our products are shipped ensuring the customer the utmost attention and care of the packaging, whatever the value of the product and whatever the destination of the same. In this sense, Alemanni undertakes to ensure that the product arrives at its destination intact as it left.